SDS MATERIAL SAFETY DATA SHEET
SECTION I-CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
PRODUCT NAME: CLEAN AND CLEAR
PRODUCT DESCRIPTION: ENZYMATIC CLEANER
MANUFACTURER’S NAME: SOUTHLAND DISTRIBUTION & SALES
EMERGENCY TELEPHONE: (800)880-0240 (706)868-0105
ADDRESS: 3822 COMMERCIAL CT., STE C, AUGUSTA, GA 30907
SECTION II - HAZARDOUS INGREDIENTS ISOPROPYLALCOHOL
TLV UNITS: 400PPM
SECTION III - PHYSICAL DATA
BOILING POINT (F): 109F
SPECIFIC GRAVITY: (H2O=1): 0.87
VAPOR PRESSURE (mm Hg): N/A
PRODUCT ph: 6
SOLUBILITY IN WATER: complete
MELTING POINT: N/A
APPEARANCE AND ODOR: opal w/ alcohol odor
SECTION IV - FIRE AND EXPLOSION HAZARD DATA
FLASH POINT (F): 72F (T.C.C.)
EXTINGUISHING MEDIA: water, CO2, foam, dry chemical
SPECIAL FIRE FIGHTING PROCEDURES: none
UNUSUAL FIRE AND EXPLOSION HAZARDS: flammable
SECTION V - HEALTH HAZARD DATA
THRESHOLD LIMIT VALUE: 400 PPM based on raw material TLV
CARCINOGEN: no
ACUTE & CHRONIC HEALTH EFFECTS: undetermined
PRIMARY ROUTES OF ENTRY: skin, ingestion
EFFECTS OF OVEREXPOSURE: eyes - may cause irritation; ingestion - may be harmful if swallowed; skin - may be irritating; inhalation - may cause irritation; emergency & first aid procedures for eyes - flush with water for 15 minutes.
GET MEDICAL ATTENTION: skin - wash with warm water; inhalation - move to fresh air; ingestion - give large amount of milk or water to drink; get immediate medical attention
SECTION VI - REACTIVITY DATA
STABILITY: sable
CONDITIONS TO AVOID: open flames or sparks
INCOMPATIBILITY (Materials to avoid): none
SECTION VII - SPILL OR LEAK PROCEDURES
RESPIRATORY PROTECTION: Good Ventilation should be sufficient
GLOVES: Rubber gloves
SECTION VII - SPECIAL PROTECTION REQUIRED
RESPIRATORY PROTECTION: Good Ventilation should be sufficient
GLOVES: Rubber gloves
EYE PROTECTION: Safety glasses should be worn
Southland Distribution & Sales
www.sdssouthland.com
1-800-880-0240/Fax 706-650-7468
info@sdssouthland.com
Clean and Clear FAQ
Why do evacuation lines clog?
Protein matter in lines form bio-film. Bio-film attracts and collects particulate matter. This process continues until lines loose capacity and eventually shut down due to blockage.
Why live enzymes?
Protease enzymes naturally dissolve protein-based bio-film. Once bio-film is removed, particulate and other sediment flow freely through.
Why Surfactants?
Surfactants emulsify and help carry loosened bio-film and particulate matter through the system. They ensure that the problem does not redeposit somewhere further down the line.
Why enzymes and surfactants combined?
One loosens the deposits, one suspends and ensures they are flushed away.
Why not bleach?
Does not dissolve deposits from tubing walls
Does not emulsify sediment
Does not surface clean or attack bio-film
Attacks stainless steel
Offensive odor
Dangerous to staff, carpet, and plumbing
Why not surfactant products?
They lack enzyme power to attack and loosen protein bio-film
Why Clean & Clear?
Independent tests show Clean and Clear maintains unrivaled enzyme activity
Clean and Clear was compared in accelerated shelf life testing to other evacuation cleaning products
Clean and Clear maintains excellent enzyme activity for one year
Clean and Clear is safe and effective to use
Clean and Clear eliminates offensive odors
Clean and Clear Instructions
A multi-enzyme solution for elimination of organic matter and odors for the evacuation system.
Clean and Clear is designed to clean and eliminate odor by dissolving organic matter. This mutli-enzyme formula is
Non-toxic
Non-caustic
Bio-degradable
Harmless to plastic, rubber and plumbing
Clean and Clear is a Non-foaming solution specifically designed for safe use in turbine ecacuator systems.
Clean and Clear is excellent for cleaning all organic stains and odors.
Clean and Clear for evacuation and commercial drain system cleaning: At the end of the day, add 3 ounces of Clean and Clear to 1 gallon of warm water in suitable container or sink. With system full, open, draw solution through ecacuator hoses and saliva ejectors. Clean and Clear should be used 3 times weekly. If surgery is frequent or evacuator discharges are massive, daily use is recommended. When used as directed. Clean and Clear will keep hoses, traps and drains free of organic matter and control odor.
Clean and Clear for surgical, dental and medical instrument cleaning: Dilute Clean and Clear 1 part to 10 parts warm water. Soak instruments for 5 to 10 minutes, then rinse with water. Clean and Clear effectively removes organic debris and blood, leaving instruments clean and free of any build-up or residues. Extra heavy or old dried deposits may require extra soaking time or a light brushing.
Clean and Clear for stain removal in garments, fabrics and carpets: Wet stain with 10% solution as used in cleaning instruments. Let stand 3 to 5 minutes, then blot out or rinse out. For stubborn stains, repeat as necessary.
Distributed by: Universal Dental Products, Inc., 701 Hill Road North, Pickerington, Ohio 43147, USA, (614)833-9022, www.ccclean.com, MFG IN USA
Southland Distribution & Sales
www.sdssouthland.com
1-800-880-0240/Fax 706-650-7468
info@sdssouthland.com
